With the growing demand for sharpening equipment in the grinding industry, Beijing Demina produces the China Micra-10 sharpening machine according to the actual needs of users. Once the device was launched, it was welcomed by the majority of users. Before using the Micra-10 sharpening machine, be sure to read the instructions carefully to prevent misoperation and cause accidental injury. So if it is a novice user, how to operate the device safely? Let’s introduce it to everyone.
Before grinding, check whether the three-phase four-wire power of the equipment is normal. And whether the running direction of the grinding head and the grinding wheel is consistent with the direction indicated by the travel button. During the operation, the track should be filled with oil at any time to prevent the track from wearing due to a lack of oil. During the calibration process, if there are left and right error, it can be adjusted by the adjusting screw on the knife holder.
In the Micra-10 small drill grinding machine, care should be taken that the amount of feed is not excessive. Generally, it is controlled between 0.01-0.02mm to prevent the excessive amount of feed, which will cause the blade to be deformed due to excessive heat and heat so that the sharpened blade is not in a straight line. When the blade is sharpened to a certain extent, if there is a burr on the edge of the blade, the blade is sharpened. At this time, the operator should stop grinding, and no longer need to enter the knife, until the spark becomes smaller, remove the blade and deburr with an oil stone.
When the sharpener equipment is not in use, the water stains on the knife holder must be wiped clean and grease or oil applied to prevent rust. In the process of sharpening the knife and in the process of loading and unloading the blade, the operator must concentrate on the same to prevent the danger of personal injury.
Demina Precision Machinery Co., Ltd is a professional Micra-10 sharpening machine manufacturer. Our company produces sharpener equipment that has not only good performance but also cheap price. All the equipment we produce is directly sold by manufacturers to ensure the quality of the equipment. Welcome everyone to come to buy.